PLANET XGSW-28040HP - Manual (Page 207)

Command Guide of XGSW-28040HP
Switch (config)# ip igmp unknown-flooding
4.2.84 ip name-server
Command:
ip name-server
ip Internet Protocol
name-server Domain Name System
A valid IPv4 unicast address
Default:
Enabled
Usage Guide:
To configure DNS server IP address.
Example:
To configure DNS server IP address (8.8.8.8).
Switch# configure terminal
Switch (config)# ip name-server 8.8.8.8
4.2.85 ip name-server dhcp
Command:
ip name-server dhcp
ip Internet Protocol
name-server Domain Name System
dhcp Dynamic Host Configuration Protocol
Default:
None
Usage Guide:
To configure DNS IP address via DHCP Server.
Example:
To configure DNS IP address via DHCP Server.
Switch# configure terminal
Switch (config)# ip name-server 8.8.8.8
-207-