PLANET XGSW-28040HP - Manual (Page 209)

Command Guide of XGSW-28040HP
Switch# configure terminal
Switch (config)# ip route 192.168.1.0 255.255.255.0 192.168.0.1
4.2.88 ip routing
Command:
ip routing
ip Internet Protocol
routing Enable routing for IPv4 and IPv6
Default:
None
Usage Guide:
To enable IP routing
Example:
To enable IP routing
Switch# configure terminal
Switch (config)# ip routing
4.2.89 ip source binding interface
Command:
ip source binding interface 10GigabitEthernet | GigabitEthernet
ip Internet Protocol
source source command
binding ip source binding
interface ip source binding entry interface config
Select an IP Address to configure
Select a subnet mask to configure
-209-