PLANET XGSW-28040HP - Manual (Page 295)

Command Guide of XGSW-28040HP
4.2.201 sflow agent-ip
Command:
sflow agent-ip { ipv4 | ipv6 }
sflow Statistics flow
agent-ip The agent IP address used as agent-address in UDP datagrams. Defaults to IPv4 loopback address.
Default:
None
Usage Guide:
To configure the agent IP address of sFlow
Example:
To configure the agent IP address (10.10.10.10) of sFlow
Switch# configure terminal
Switch (config)# sflow agent-ip ipv4 10.10.10.10
4.2.202 sflow collector-address
Command:
sflow collector-address
sflow Statistics flow
collector-address Collector address
IPv4 address or IPv6 address or hostname identifying the collector receiver
Default:
None
Usage Guide:
To configure the Collector address of sFlow
Example:
To configure the Collector address (10.10.10.10) of sFlow
Switch# configure terminal
Switch (config)# sflow collector-address 10.10.10.10
-295-