PLANET XGSW-28040HP - Manual (Page 180)

Command Guide of XGSW-28040HP
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping unsolicited-report-interval 99
4.2.66.18 ipv6 address
Command:
Ipv6 address X:X:X:X::X/<0-128>
ipv6 IPv6 configuration commands
address Configure the IPv6 address of an interface
X:X:X:X::X/<0-128> IPv6 prefix x:x::y/z
Default:
None
Usage Guide:
To configure IPv6 address for specific VLAN
Example:
To configure IPv6 address (2001::7788/64) for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 address 2001::7788/64
4.2.66.19 ipv6 mld snooping
Command:
ipv6 mld snooping
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
Default:
Disabled
Usage Guide:
To enable MLD snooping for specific VLAN
Example:
To enable MLD snooping for VLAN X
-180-