PLANET XGSW-28040HP - Manual (Page 242)

Command Guide of XGSW-28040HP
Switch# configure terminal
Switch (config)# mep 1 client domain evc
4.2.127 mep client flow
Command:
mep client flow level [ ais-prio [ | ais-highest ] ]
[ lck-prio [ | lck-highest ] ]
mep Maintenance Entity Point
The MEP instance number.
level The MEG level on the client layer
The MEG level value
ais-prio AIS injection priority
AIS injection priority value
ais-highest Request the highest possible AIS priority
lck-prio LCK injection priority
LCK injection priority value.
lck-highest Request the highest possible LCK priority.
Default:
0
Usage Guide:
To configure Client Flow of MEP
Example:
To configure Client Flow of MEP 1 as below table.
Switch# configure terminal
Switch (config)# mep 1 client flow 5 level 4 ais-prio ais-highest lck-prio 3
-242-