PLANET XGSW-28040HP - Manual (Page 176)

Command Guide of XGSW-28040HP
4.2.66.11 ip igmp snooping priority
Command:
ip igmp snooping priority
ip Interface Internet Protocol config commands
igmp Internet Group Management Protocol
snooping Snooping IGMP
priority Interface CoS priority
CoS priority ranges from 0 to 7
Default:
0
Usage Guide:
To configure CoS priority of IGMP snooping for specific VLAN
Example:
To configure CoS priority (5) of IGMP snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping priority 5
4.2.66.12 ip igmp snooping querier address
Command:
ip igmp snooping querier address
ip Interface Internet Protocol config commands
igmp Internet Group Management Protocol
snooping Snooping IGMP
querier IGMP Querier configuration
address IGMP Querier address configuration
A valid IPv4 unicast address
Default:
0.0.0.0
Usage Guide:
To configure Querier address of IGMP snooping for specific VLAN
Example:
To configure Querier address (192.168.1.15) of IGMP snooping for VLAN X
-176-