168 poe admin-mode enable, 169 poe management mode – PLANET XGSW-28040HP User Manual
Page 267
Command Guide of XGSW-28040HP
Usage Guide:
To configure the IP addresses of NTP Server
Example:
To configure the IP address (9.9.9.9) of NTP Server for index 1
Switch# configure terminal
Switch (config)# ntp server 1 ip-address 9.9.9.9
4.2.168 poe admin-mode enable
Command:
poe admin-mode enable
poe Power Over Ethernet
admin-mode Enable or disable global PoE management function.
enable poe admin-mode enable
Default:
Enabled
Usage Guide:
To enable System PoE Admin Mode.
Example:
To enable System PoE Admin Mode.
Switch# configure terminal
Switch (config)# poe admin-mode enable
4.2.169 poe management mode
Command:
poe management mode { class-consumption | class-reserved-power |
allocation-consumption | allocation-reserved-power | lldp-consumption |
lldp-reserved-power }
poe Power Over Ethernet
management Use management mode to configure PoE power management method.
mode mode
allocation-consumption Max. port power determined by allocated, and power is managed according to power
consumption.
-267-