PLANET XGSW-28040HP - Manual (Page 220)

Command Guide of XGSW-28040HP
Switch# configure terminal
Switch (config)# ipv6 route 2001::7788/128 2002::1
Example 2:
To configure static route as below table for IPv6.
Switch# configure terminal
Switch (config)# ipv6 route 2001::7788/128 interface vlan 1 fe80::1
4.2.102 lacp system-priority
Command:
lacp system-priority <1-65535>
lacp LACP settings
system-priority System priority
<1-65535> Priority value, lower means higher priority
Default:
32768
Usage Guide:
To configure LACP system-priority.
Example:
To configure LACP system-priority (99).
Switch# configure terminal
Switch (config)# lacp system-priority 99
-220-