PLANET XGSW-28040HP - Manual (Page 364)

Command Guide of XGSW-28040HP
Example:
To display the ARP Inspection Configuration.
Switch # show ip arp inspection
ARP Inspection Mode : disabled
Port Port Mode Check VLAN Log Type
---- --------- ---------- --------
GigabitEthernet 1/1 disabled disabled NONE
GigabitEthernet 1/2 disabled disabled NONE
4.21.30 show ip arp inspection entry
Command:
show ip arp inspection entry [ dhcp-snooping | static ] [ interface (
[ ] ) ]
show Show running system information
ip Internet Protocol
arp Address Resolution Protocol
inspection ARP inspection
entry arp inspection entries
dhcp-snooping learn from dhcp snooping
static setting from static entries
interface arp inspection entry interface config
Default:
N/A
Usage Guide:
To display the ARP Inspection entry.
Example:
To display the ARP Inspection entry.
Switch # show ip arp inspection entry
-364-