PLANET XGSW-28040HP - Manual (Page 313)

Command Guide of XGSW-28040HP
Example:
To enable the Restricted Role of CIST
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# spanning-tree restricted-role
4.2.213.12 spanning-tree restricted-tcn
Command:
spanning-tree restricted-tcn
spanning-tree Spanning Tree protocol
restricted-tcn Restrict topology change notifications
Default:
Disabled
Usage Guide:
To enable the Restricted TCN of CIST
Example:
To enable the Restricted TCN of CIST
Switch# configure terminal
(config)# spanning-tree aggregation
(config-stp-aggr)# spanning-tree restricted-tcn
4.2.214 switchport vlan mapping
Command:
switchport vlan mapping
switchport Set switching mode characteristics
vlan vlan - Vlan translation
mapping Add VLAN translation entry into a group
Group id
VLAN list
< translation_vlan > translation VLAN ID
Default:
None
-313-