PLANET XGSW-28040HP - Manual (Page 289)

Command Guide of XGSW-28040HP
4.2.192 radius-server attribute 4
Command:
radius-server attribute 4
radius-server Configure RADIUS
4 NAS-IP-Address
Default:
None
Usage Guide:
To configure the NAS-IP-Address
Example:
To configure the NAS-IP-Address (7.7.7.7)
Switch# configure terminal
Switch (config)# radius-server attribute 4 7.7.7.7
4.2.193 radius-server attribute 95
Command:
radius-server attribute 95
radius-server Configure RADIUS
95 NAS-IPv6-Address
Default:
None
Usage Guide:
To configure the NAS-IPv6-Address
Example:
To configure the NAS-IPv6-Address (2001::7788)
Switch# configure terminal
Switch (config)# radius-server attribute 95 2001::7788
-289-