PLANET XGSW-28040HP - Manual (Page 363)

Command Guide of XGSW-28040HP
4.21.28 show ip arp inspection
Command:
show ip arp inspection
show Show running system information
ip Internet Protocol
arp Address Resolution Protocol
inspection ARP inspection
Default:
N/A
Usage Guide:
To display the ARP Inspection Configuration.
Example:
To display the ARP Inspection Configuration.
Switch # show ip arp inspection
ARP Inspection Mode : disabled
Port Port Mode Check VLAN Log Type
---- --------- ---------- --------
GigabitEthernet 1/1 disabled disabled NONE
GigabitEthernet 1/2 disabled disabled NONE
4.21.29 show ip arp inspection
Command:
show ip arp inspection [ interface ] | vlan ]
show Show running system information
ip Internet Protocol
arp Address Resolution Protocol
inspection ARP inspection
interface Interface status and configuration
vlan VLAN status
Default:
N/A
Usage Guide:
To display the ARP Inspection Configuration.
-363-