PLANET XGSW-28040HP - Manual (Page 234)

Command Guide of XGSW-28040HP
4.2.113 lldp timer
Command:
lldp timer <5-32768>
lldp LLDP configurations.
timer Sets LLDP TX interval (The time between each LLDP frame transmitted in seconds)
<5-32768> 5-32768 seconds.
Default:
30
Usage Guide:
To configure Tx interval time of LLDP
Example:
To configure Tx interval time (555) of LLDP
Switch# configure terminal
Switch (config)# lldp timer 555
4.2.114 lldp transmission-delay
Command:
lldp transmission-delay <1-8192>
lldp LLDP configurations.
transmission-delay Sets LLDP transmision-delay. LLDP transmission delay (the amount of time that the
transmission of LLDP frames will delayed after LLDP configuration has changed) in seconds.)
<1-8192> 1-8192 seconds.
Default:
2
Usage Guide:
To configure Tx transmission-delay time of LLDP
Example:
To configure Tx transmission-delay time (88) of LLDP
Switch# configure terminal
Switch (config)# lldp transmission-delay 88
-234-