PLANET XGSW-28040HP - Manual (Page 104)

Command Guide of XGSW-28040HP
Usage Guide:
To configure EVC DEI mode
Example:
To configure EVC DEI mode (Colored) for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # evc dei colored
4.2.65.20 evc l2cp discard(GG)
Command:
evc l2cp discard
evc Ethernet Virtual Connections
l2cp Setup L2CP forwarding
discard Discard L2CP frames
Select BPDU addresses (0-15) and GARP addresses (16-31)
Default:
N/A
Usage Guide:
To configure policy ID of L2CP discard
Example:
To configure policy ID 1 of L2CP discard for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # evc l2cp discard 1
4.2.65.21 evc l2cp forward(GG)
Command:
evc l2cp forward
evc Ethernet Virtual Connections
l2cp Setup L2CP forwarding
forward Allow forwarding of L2CP frames
-104-