Avago Technologies 3ware SAS 9750-4i - Manual (Page 98)

Chapter 2. CLI Syntax Reference
90 3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.0
/c x /u x pause rebuild
This command allows you to pause the rebuild operation on the specified unit
/cx/ux.
This feature is only supported on the 7000/8000 series controllers. 9000 series
controllers have an on-board scheduler where rebuild operations can be
scheduled to take place at specified start and stop times. The /cx/ux pause
rebuild command is provided to enable 7000/8000 users to achieve similar
functionality with use of Linux-provided schedulers such as cron(8) or at(1),
or user-supplied programs.
/c x /u x resume rebuild
This command allows you to resume the rebuild operation on the specified
unit /cx/ux.
This feature is intended only for 7000/8000 series controllers. 9000 series
controllers have an on-board scheduler where rebuild operations can be
scheduled to take place at specified start and stop times. The /cx/ux resume
rebuild function is provided to enable 7000/8000 users to achieve similar
functionality with use of Linux-provided schedulers such as cron(8) or at(1),
or user supplied programs.
/c x /u x stop verify
This command stops a background verification process on the specified unit
/cx/ux. Table 9 on page 88 shows the supported matrix as a function of the
controller model and logical unit type.
/c x /u x flush
This command allows you to flush the write cache on the specified unit /ux
associated with controller /cx. Note that this command does not apply to spare
unit types.
/c x /u x set autoverify=on|off
This feature only applies to 9000 series controllers.
This command allows you to turn on and off the autoverify operation on a
specified unit /cx/ux.