Avago Technologies 3ware SAS 9750-4i - Manual (Page 72)

Chapter 2. CLI Syntax Reference
64 3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.0
Example:
//localhost> /c0 update fw=/tmp/prom0006.img
Warning: Updating the firmware can render the device driver and/or management
tools incompatible. Before you update the firmware, it is recommended that
you:
1) Back up your data.
2) Make sure you have a copy of the current firmware image so that you can
roll back, if necessary.
3) Close all applications.
Examining compatibility data from firmware image and /c0 ...
Done.
New-Firmware Current-Firmware Current-Driver Current-API
----------------------------------------------------------------------
FE9X 3.05.00.005 FE9X 3.05.00.005 2.26.04.007 2.01.00.008
Current firmware version is the same as the new firmware.
Recommendation: No need to update.
Given the above recommendation...
Do you want to continue ? Y|N [N]: y
Downloading the firmware from file /tmp/prom0006.img ... Done.
The new image will take effect after reboot.
force attribute is optional. If you include it, the compatibility checks are
bypassed.
/c x add rebuild= ddd:hh:duration
This command adds a new task slot to the Rebuild Task Schedule on the day
ddd (where ddd is Sun, Mon, Tue, Wed, Thu, Fri, and Sat), at the hour hh
(range 0 .. 23), for a duration of duration (range 1 .. 24) hours. A maximum of
seven rebuild task slots can be included in the schedule. This command will
fail if no (empty) task slot is available.
Example:
//localhost> /c1 add rebuild=Sun:16:3
Adding scheduled rebuild to slot 7 for [Sun, 4:00PM, 3hr(s)] ... Done
In this example, a rebuild task slot is added to the schedule, so that rebuilds
can be executed on Sundays at 16 hours (4:00 PM) for a duration of 3 hours.
Note: The prom image number will vary for different controllers. Prom0006.img is
for the 9650SE, prom0008.img is for the 9690SA, and prom0011.img is for the
9750.