Avago Technologies 3ware SAS 9750-4i - Manual (Page 32)

Chapter 2. CLI Syntax Reference
24 3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.0
controller object command /cx/ux migrate to change the configuration of a
RAID array. For details, see “Unit Object Commands” on page 79.
Phy Object Commands. Phy object commands provide information and
perform actions related to a specific phy on a 9750 or 9690SA controller.
Port Object Commands. Port object commands provide information and
perform actions related to a drive on a specific port or vport. You can use port
object commands for such tasks as seeing the status, model, or serial number
of the drive. For details, see “Port Object Commands” on page 104.
BBU Object Commands. BBU object commands provide information and
perform actions related to a Battery Backup Unit on a specific controller. For
details, see “BBU Object Commands” on page 116.
Enclosure Object Commands. Enclosure object commands provide
information and perform actions related to a particular enclosure. For
example, you can use enclosure object commands to see information about an
enclosure and its elements (slots, fan, and temperature sensor elements).
Help Commands. Help commands allow you to display help information for
all commands and attributes. For details, see “Help Commands” on page 133.
Shell Object Commands
Shell object commands are either applicable to all the controllers in the
system (such as show, rescan, flush, commit), or redirect the focused object.
Syntax
focus object
commit
flush
rescan
show [attribute [modifier]]
alarms [reverse]
diag
rebuild
selftest
ver
verify
update fw=filename_with_path [force]