Avago Technologies 3ware SAS 9750-4i - Manual (Page 144)

Chapter 2. CLI Syntax Reference
136 3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.0
Typical output looks like the following.
//localhost> help
Copyright(c) 2004-2009 Applied Micro Circuits Corporation
(LSI). All rights reserved.
3ware CLI (version 2.x)
Commands Description
--------------------------------------------------------------
show Displays information about controller(s), unit(s) and port(s).
flush Flush write cache data to units in the system.
rescan Rescan all empty ports for new unit(s) and disk(s).
update Update controller firmware from an image file
commit Commit dirty DCB to storage on controller(s). (Windows only)
/cx Controller specific commands.
/cx/ux Unit specific commands.
/cx/px Port specific commands.
/cx/bbu BBU specific commands. (9000 only)
/cx/ex Enclosure Specific commands. (9750 and 9690SA only)
Certain commands are qualified with constraints of controller type/model
support. Please consult the tw_cli documentation for explanation of the
controller-qualifiers.
The controller-qualifiers of the Enclosure commands (/ex) also apply to
Enclosure Element specific commands (e.g., /ex/elementx).
Type help to get more details about a particular command. For more
detail information see tw_cli's documentation.
help show
This command provides specific show-related help, illustrating various ways
to use the show command. It provides reports on Controllers, Units and
Drives. See the section “Shell Object Commands” on page 24 for more
information.
help flush
This command provides specific flush-related help, illustrating various ways
to use the flush command. See the section “Shell Object Commands” on
page 24 for more information.
help rescan
This command provides specific rescan related help, illustrating various ways
to use the rescan command. See the section “Shell Object Commands” on
page 24 for more information.