Avago Technologies 3ware SAS 9750-4i - Manual (Page 116)

Chapter 2. CLI Syntax Reference
108 3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.0
Example:
//localhost> /c0/p5 show smart
10 00 01 0F 00 C8 C8 00 00 00 00 00 00 00 03 03
00 DA B5 34 08 00 00 00 00 00 04 32 00 64 64 88
00 00 00 00 00 00 05 33 00 C7 C7 01 00 00 00 00
00 00 07 0F 00 C8 C8 00 00 00 00 00 00 00 09 32
00 42 42 2A 63 00 00 00 00 00 0A 13 00 64 64 00
00 00 00 00 00 00 0B 12 00 64 64 00 00 00 00 00
00 00 0C 32 00 64 64 88 00 00 00 00 00 00 BE 22
00 3A 2F 2A 00 00 00 00 00 00 C2 22 00 69 5E 2A
00 00 00 00 00 00 C4 32 00 C7 C7 01 00 00 00 00
00 00 C5 12 00 C8 C8 00 00 00 00 00 00 00 C6 10
00 C8 C8 00 00 00 00 00 00 00 C7 3E 00 C8 C8 01
00 00 00 00 00 00 C8 09 00 C8 C8 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 82 00 74 13 01 7B
03 00 01 00 02 3C 06 00 00 00 00 00 00 00 00 00
00 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Notes:
The SMART data is not decoded.
If the drive attached to the specified port is not present or if there are cabling
problems reaching the drive, CLI will return an error. This can be one way of
detecting whether or not a drive is present.
For SAS drives, although the SMART data is now included when you use this
command, drive attributes for temperature, spindle speed, reallocated sectors, and
power-on hours could be extracted from SMART data with the following commands:
/cx/px show temperature
/cx/px show spindlespd
/cx/px show rasect
/cx/px/ show pohrs
You may also use ‘/cx/px show all’ to retrieve all of the drive attributes.