Avago Technologies 3ware SAS 9750-4i - Manual (Page 28)

Chapter 2. CLI Syntax Reference
20 3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.0
Controller Maintenance Tasks (continued)
Add a time slot to a verify
schedule /cx add verify 65
Add a time slot to a selftest
schedule /cx add selftest 67
Enable/disable the initialize/
rebuild/migrate schedule and set
the task rate /cx set rebuild 69
Enable/disable the verify schedule
and set the task rate /cx set verify 71
Set the verify schedule to
advanced or basic /cx set
verify=advanced|basic|1..5 72
Set the rebuild/migrate task rate /cx set rebuildrate 70
Set the rebuild/migrate task mode /cx set rebuildmode 70
Set the verify task rate /cx set verifyrate 74
Set the verify task mode /cx set verifymode 73
Set the basic verify start time and
day /cx set verify=basic [pref=ddd:hh] 72
Enable/disable the selftest
schedule /cx set selftest 74
View controller alarms /cx show alarms
/cx show events
/cx show AENs
46
Unit Maintenance Tasks
Start a rebuild /cx/ux start rebuild 88
Start a verify /cx/ux start verify 88
Pause/resume rebuild /cx/ux pause rebuild and /cx/ux
resume rebuild 90
Stop verify /cx/ux stop verify 90
Enable/disable autoverify /cx/ux set autoverify 90
Identify all drives that make up a
unit by blinking associated LEDs /cx/ux set identify 64
Port Tasks
Locate drive by blinking an LED /cx/px set identify 113
Table 5: Common Tasks Mapped to CLI Commands
Task CLI Command Page