Cli syntax reference, Common tasks mapped to cli commands, Chapter 2 – Avago Technologies 3ware SAS 9750-4i User Manual
Page 26: Cli syntax reference chapte

18
3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.0
2
CLI Syntax Reference
This chapter provides detailed information about using the command syntax
for the 3ware CLI.
Throughout this chapter the examples reflect the interactive method of
executing 3ware CLI.
Common Tasks Mapped to CLI Commands
The table below lists many of the tasks people use to manage their RAID
controllers and units, and lists the primary CLI command associated with
those tasks.
Note:
The output of some commands varies somewhat for different types of
controllers, and may vary if you have an enclosure attached. For most commands
where this is the case, examples are provided to show the differences.
Table 5: Common Tasks Mapped to CLI Commands
Task
CLI Command
Page
Controller Configuration Tasks
View information about a controller
/cx show
View controller policies and other
details
/cx show [attribute] [attribute]
View drive performance statistics