Avago Technologies 3ware SAS 9750-4i - Manual (Page 27)

Common Tasks Mapped to CLI Commands
www.lsi.com/channel/products 19
Set policies for a controller
• Modify staggered spinup
• Disable write cache on unit
degrade
• Enable/disable autocarving
• Enable/disable autorebuild
• Set the autocarve volume size
• Enable/disable drive
performance monitoring
statistics (dpmstat)
/cx set stagger and /cx set spinup
/cx set ondegrade
/cx set autocarve
/cx set autorebuild
/cx set carvesize
/cx set dpmstat
75
75
75
76
75
68
Unit Configuration Tasks
View information about a unit /cx/ux show 80
Create a new unit /cx add 56
Create a hot spare /cx add 56
Enable/disable unit write cache /cx/ux set cache
/cx/ux set wrcache
92
Enable Basic or Intelligent read
cache, or disable both. /cx/ux set rdcache 92
Set the queue policy /cx/ux set qpolicy 94
Set the rapid RAID recovery policy /cx/ux set rapidrecovery 95
Set the storsave profile /cx/ux set storsave 95
Unit Configuration Changes
Change RAID level /cx/ux migrate 97
Change stripe size /cx/ux migrate 97
Expand unit capacity /cx/ux migrate 97
Delete a unit /cx/ux del 87
Remove a unit (export) /cx/ux remove 87
Name a unit /cx/ux set name 94
Controller Maintenance Tasks
Update controller with new
firmware /cx update 63
Add a time slot to a rebuild
schedule /cx add rebuild 64
Table 5: Common Tasks Mapped to CLI Commands
Task CLI Command Page