Avago Technologies 3ware SAS 9750-4i - Manual (Page 29)

Common Tasks Mapped to CLI Commands
www.lsi.com/channel/products 21
Check if LED is set to on or off /cx/px show identify 106
View information for specific drive /cx/px show 104
View the status of specific drive /cx/px show status 107
Show statistics for the drive on a
particular port /cx/px show dpmstat
type=inst|ra|lct|histdata|ext 110
Clear statistics counters for a
particular drive /cx/px set dpmstat=clear
[type=ra|lct|ext] 114
PHY Tasks
View details about link speed for a
specified phy /cx/phyx show 115
Set the link speed for a specified
phy /cx/phyx set link=auto|1.5|3.0|6.0 115
BBU Tasks
Check on charge and condition of
battery /cx/bbu/ show status 118
Start a test of the battery /cx/bbu test [quiet] 120
Enclosure Tasks
View information about an
enclosure and its components /cx/ex show 123
Locate a drive slot in an enclosure
by blinking an LED /cx/ex/slotx set identify 128
Locate a fan in an enclosure by
blinking an LED /cx/ex/fanx set identify 129
Set the speed for a fan in an
enclosure /cx/ex/fanx set speed 129
Locate a power supply in an
enclosure by blinking an LED /cx/ex/pwrsx set identify 131
Locate a temperature sensor in an
enclosure by blinking an LED /cx/ex/tempx set identify 132
Turn off or mute an audible alarm
in an enclosure /cx/ex/almx set alarm 132
Table 5: Common Tasks Mapped to CLI Commands
Task CLI Command Page