Avago Technologies 3ware SAS 9750-4i - Manual (Page 87)

Unit Object Commands
www.lsi.com/channel/products 79
Unit Object Commands
Unit Object commands provide information and perform actions related to a
specific unit, such as
/c0/u1 (unit 1 on controller 0). For example, you use
logical disk object commands for such tasks as seeing the rebuild, verify, or
initialize status of a unit, starting, stopping, and resuming rebuilds and
verifies, and setting policies for the unit.
Syntax
/cx/ux show
/cx/ux show attribute [attribute ...] where attributes are:
autoverify (9000 series)| initializestatus|cache|
wrcache|rdcache|name(9000 series) |qpolicy(9000 series
SX/SE/SA only)|rebuildstatus |serial(9000 series)|status
|verifystatus|storsave(9000 series SX/SE/SA only)
|rapidrecovery (9000 series SE/SA)|
|volumes(9000 series)|ignoreECC (9000 series)|
identify (9000 series SX/SE/SA only)
/cx/ux show all
/cx/ux start rebuild disk=<p:-p...> [ignoreECC]
/cx/ux start verify
/cx/ux pause rebuild (7000/8000 only)
/cx/ux resume rebuild (7000/8000 only)
/cx/ux stop verify
/cx/ux flush
/cx/ux del [noscan] [quiet]
/cx/ux set autoverify=on|off
/cx/ux set cache=on|off [quiet]
/cx/ux set wrcache=on|off [quiet]
/cx/ux set rdcache=basic|intelligent|off
/cx/ux set identify=on|off (9000 series SX/SE/SA only))
/cx/ux set ignoreECC=on|off
/cx/ux set qpolicy=on|off (9000 series SX/SE/SA only)
/cx/ux set name=string (9000 series)
/cx/ux set rapidrecovery=all|rebuild|disable [quiet](9000
series SE/SA only)
/cx/ux set storsave=protect|balance|perform [quiet](9000
series SX/SE/SA only)
/cx/ux migrate type=RaidType [disk=p:-p]
[group=3|4|5|6|7|8|9|10|11|12|13|14|15|16]
[stripe=size] [noscan] [nocache] [autoverify]
(9000 series) RaidType = {raid0, raid1, raid5,
raid6(9650SE and later only), raid10, raid50, single}
/cx/ux remove [noscan] [quiet]
Note : Features indicated as “9690SA only,” “9000 series,” or “9000 series SE/SA
only” also apply to 9750 controllers.