Avago Technologies 3ware SAS 9750-4i - Manual (Page 37)

Shell Object Commands
www.lsi.com/channel/products 29
show ver
This command will show the CLI and API version.
Example:
//localhost> show ver
CLI Version = 2.00.03.0xx
API Version = 2.01.00.xx
In the above example, “xx” stands for the actual version. See the Release
Notes for details.
show verify
This command displays all verify schedules for the 9000 series controllers in
the system. The output shown will be either the advanced or the basic verify
schedule, depending upon which is enabled for each controller. Basic verify is
supported on 9750 and 9690SA controllers, and on 9650SE controllers
running 9.5.1 or later.
Example:
This example shows two controllers, one with an advanced verify schedule
and one with a basic verify schedule.
//localhost> show verify
Verify Schedule for Controller /c2
========================================================
Slot Day Hour Duration AdvVerify
--------------------------------------------------------
1 Sun 12:00am 24 hr(s) on
2 Mon 12:00am 24 hr(s) on
3 Wed 4:00pm 24 hr(s) on
4 Wed 12:00am 24 hr(s) on
5 Thu 12:00am 24 hr(s) on
6 Fri 12:00am 24 hr(s) on
7 Sat 12:00am 24 hr(s) on
/c3 basic verify weekly preferred start: Saturday, 12:00AM
For additional information about verify schedules, see “/cx add
verify=ddd:hh:duration” on page 65, “/cx set verify=basic [pref=ddd:hh]” on
page 72, and see the discussion of background tasks and schedules in 3ware
SATA+SAS RAID Controller Card Software User Guide, Version 10.0.