TA Triumph-Adler LP 4024 - Manual (Page 93)

Using the Operator Panel
1-78
6
Press the or key to display the desired data name.
If you want to abandon the reading of data, press the CANCEL key.
7
Press the ENTER key. Processing appears and the reading of data
from the CompactFlash card starts.
Writing Data
Data can be written to a CompactFlash card until no space is left for
storing. When writing to a CompactFlash card, a name is assigned to the
file automatically. You can use the procedure explained later in this section
to print a list of data names for confirmation.
To write data to a CompactFlash card, proceed as follows.
First check that the CompactFlash card is properly formatted. Otherwise,
the >Write Data message to be explained below will not be shown on the
message display.
If the card inserted in the CompactFlash card slot is not formatted, the
>Format option will automatically appear on the display. See
Formatting
on page 1-82 and format the memory card.
1 Press the MENU key.
2
Press the or key repeatedly until Memory Card > appears.
3
Press the > key.
4
Press the or key repeatedly until >Write Data appears.
ENTER
Note
MENU
Memory Card >
?
>Write Data