TA Triumph-Adler LP 4024 User Manual
Page 111
Using the Operator Panel
1-96
13
Press the ENTER key. A blinking cursor ( ) appears.
14
Press the or key to increase or decrease the value of the figure
where the cursor is blinking and display the desired width. The
width can be set between 148 and 216 mm (5.83 to 8.5 inches). You
can use the > and < keys to move the cursor right and left.
If you want to abandon the setting procedure, press the CANCEL
key.
15
Display the paper width and press the ENTER key.
16
When the width is set, press the key. >>Y Dimension appears
(the paper length setting). Set the desired length in the same way as
the width. The length can be set between 210 and 356 mm (8.27 to
14.02 inches).
17
Display the paper length, press the ENTER key.
18
Press the MENU key. The message display returns to Ready.
To print using the custom size set above, define the same custom size
on the printer driver. For details, see
ENTER
>>X Dimension
216 mm
Enter the paper size for X Dimension and Y Dimension as shown in
the figure.
X Dimension
Y Dim
en
si
on
148 to 216 mm
(5.83 to 8.5 inches)
210
to
356
mm
(8.2
7 to
14
.02
inc
he
s)
ENTER
ENTER
MENU