TA Triumph-Adler LP 4024 - Manual (Page 41)

Using the Operator Panel
1-26
6
Press the or key to display the desired user name.
7
Press the ENTER key. user name and the name entered for Custom
Job Name in the printer driver (job title, in this example) appear
with a question mark (?) shown blinking before that name.
8
Pressing the or key to display the desired job title.
If you want to abandon the selection, press the CANCEL key.
9
Press the ENTER key. If a user ID number was entered using the
printer driver, the ID entry display appears. Enter the four-digit user
ID entered in the printer driver and press the ENTER key.
To enter the ID, press the < or > key to move the cursor to the
number to be changed and then enter the correct number by pressing
the or key.
10
The number of copies to be printed can be set. To increase the copy
count, press the key; to decrease the copy count, press the key
as many times as desired.
If you want to abandon the selection, press the CANCEL key.
11
Press the ENTER key. The message display indicates Processing,
then Ready. The specified number of copies for the job is printed.
>Private/Stored
?user name
ENTER
>user name
?job title
ENTER
>job title
ID 0000
>job title
?Copies 001
ENTER