TA Triumph-Adler LP 4024 - Manual (Page 156)

Waste Toner Bottle Replacement
2-8
6
Insert the new waste toner bottle as shown in the figure below. The
bottle will be locked when it fits into place.
7
Ensure that it is correctly inserted and close the side cover.
The printer parts must be cleaned when replacing the toner
container. See section 2.3 Cleaning on page 2-9 .
8 When replacement of the toner container and waste toner bottle is
completed, set the toner ID (see Setting the Toner ID on page
1-132 ). If you replaced the toner container when Replace toner
Clean printer was not displayed, reset the remaining toner
counter (see Resetting the Remaining Toner Counter on page
1-113 ).
New Waste Toner
Bottle