TA Triumph-Adler LP 4024 - Manual (Page 59)

Using the Operator Panel
1-44
8
Press the or key to display the desired setting. The setting
changes as shown below.
The baud rate can be selected from 1200, 2400, 4800, 9600 (default),
19200, 38400, 57600, and 115200.
Some computers may not be compatible with a baud rate of 115200 bps.
If you set the baud rate to 115200 and communication problems occur,
lower the baud rate.
9
Display the desired baud rate and press the ENTER key.
10
Press the MENU key. The message display returns to Ready.
Note
ENTER
MENU