Quick copy – TA Triumph-Adler LP 4024 User Manual
Page 36
Using the Operator Panel
1-21
Quick Copy
This mode enables you to print additional copies of a finished print job.
If you print a Quick Copy using the printer driver, it is printed and stored
on the Microdrive. If additional copies are required, you can reprint the
required number of copies from the printer operator panel.
The default number of print jobs that can be stored on the Microdrive is 32.
This can be changed to up to 50 from the e-MPS Configuration menu.
When the number of jobs reaches the limit, the oldest job will be
overwritten by the new one. When the printer is turned off, all the stored
jobs will be deleted.
Printing Additional Copies by Quick Copy
When printing, make the Quick Copy settings using the printer driver. For
how to make the settings, refer to the
.
1
Press the MENU key.
2
Press the or key repeatedly until e-MPS > appears.
3
Press the > key.
4
Press the or key repeatedly until >Quick Copy appears.
The name entered for User Name in the printer driver (user name,
in this example) also appears.
>Quick Copy
MENU
e-MPS >
?
>Quick Copy
user name