Changing the emulation, Changing the emulation -50, Emulation – TA Triumph-Adler LP 4024 User Manual
Page 65: Line printer, Print kpdl errs, Pcl 6, Kpdl, Kpdl (auto), Diablo 630, Epson lq-850
Using the Operator Panel
1-50
Changing the Emulation
The emulation mode for the current interface can be changed.
1
Press the MENU key.
2
Press the or key repeatedly until Emulation appears. One of
the emulation names shown below appears, indicating the current
emulation.
PCL 6 (default)
KPDL
KPDL (AUTO)
Line Printer
IBM Proprinter
DIABLO 630
EPSON LQ-850
3
Press the ENTER key. A blinking question mark (?) appears.
4
Press the or
key repeatedly until the desired emulation mode
appears.
If you want to abandon the selection, press the CANCEL key.
5
Press the ENTER key. The > key allows access to sub item >Code
set.
6
Press the MENU key. The message display returns to Ready.
After changing the emulation, you have the option to change the character
code set. Available character code sets vary depending on the current
emulation.
Emulation >
PCL 6
MENU
ENTER
Emulation
?PCL 6
ENTER
MENU