Cr action, Ignore cr, Cr and lf – TA Triumph-Adler LP 4024 User Manual
Page 83: Cr only
Using the Operator Panel
1-68
Carriage-Return (CR) Action
This procedure instructs the printer what to do when it receives a carriage-
return code (character code 0DH)
1
Press the MENU key.
2
Press the or key repeatedly until Page set > appears.
3
Press the > key.
4
Press the or key repeatedly until >CR Action appears.
5
Press the ENTER key. A blinking question mark (?) appears.
6
Press the or key repeatedly until desired carriage-return
action appears.
CR only
A carriage-return is performed. (Default)
CR and LF
A carriage-return and linefeed are performed.
Ignore CR
The carriage-return code is ignored.
If you want to abandon the setting procedure, press the CANCEL
key.
7
When the desired action is displayed, press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
>CR Action
MENU
Page set >
?
>CR Action
CR only
ENTER
>CR Action
? CR only
ENTER
MENU