TA Triumph-Adler LP 4024 - Manual (Page 117)

Using the Operator Panel
1-102
2
Press the or key repeatedly until Paper Handling >
appears.
3
Press the > key.
4
Press the or key repeatedly until >Duplex Mode > appears.
5
Press the ENTER key. A blinking question mark (?) appears.
6
Press the or key to display the desired duplex mode. The
display changes as shown below.
None (default)
Short edge bind
Long edge bind
7
When the desired duplex mode displayed, press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
Duplex Printing from the MP tray
In first mode, be sure to set the MP tray to the same paper size and paper
type as set for the current paper cassette. If the paper size or type differs, a
paper jam may result. Also note that it is not possible to select the MP tray
as the current paper cassette and perform duplex printing. We therefore
recommend that duplex printing be performed from the paper cassette.
Paper Handling >
?
>Duplex Mode >
None
ENTER
>Duplex Mode >
? None
ENTER
MENU