TA Triumph-Adler LP 4024 - Manual (Page 122)

Using the Operator Panel
1-107
Customizing Paper Type
The following describes the procedure used to set a user-defined paper type
for the printer. Eight custom user settings may be registered. After having
been set, any of these may be called up when setting the paper type for a
paper source.
The paper weight and duplex path can be set (see
Setting the Paper
Weight on page 1-109 , and Setting the Duplex Path on page 1-110 ) after
selecting the paper type to be customized as follows. For how to reset the
customized settings, see Resetting the Type Adjust on page 1-111 .
1
Press the MENU key.
2
Press the or key repeatedly until Paper Handling >
appears.
3
Press the > key.
4
Press the or key repeatedly until >Type Adjust > appears.
5
Press the ENTER key. A blinking question mark (?) appears.
>Type Adjust >
MENU
Paper Handling >
?
>Type Adjust >
Custom 1
ENTER >Type Adjust >
? Custom 1