TA Triumph-Adler LP 4024 - Manual (Page 121)

Using the Operator Panel
1-106
Overriding A4 and Letter Size Difference
This selects whether to enable or disable the difference between A4 size
and Letter size. Under the default setting of Off, the paper size of the
paper source is matched to the paper size formatting the jobs. If these
differ, a corresponding error message is displayed. When this is set to On,
printing is performed even if the actual paper size differs from the paper
size formatting the jobs.
1
Press the MENU key.
2
Press the or key repeatedly until Paper Handling >
appears.
3
Press the > key.
4
Press the or key repeatedly until >Override A4/LT appears.
5
Press the ENTER key. A blinking question mark (?) appears.
6
Select On or Off using the or key.
7
Press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
>Override A4/LT
MENU
Paper Handling >
?
>Override A4/LT
Off
ENTER >Override A4/LT
? Off
ENTER
MENU