TA Triumph-Adler LP 4024 User Manual
Page 63
Using the Operator Panel
1-48
Printing a Network Card Interface Status Page
To use this function, the network interface card must be installed on the
printer. The FS-1800N/FS-3800N come standard with a network interface
card installed.
You can have your printer print out a status page for the network interface
card each time the printer is turned on. The network interface card status
page shows the firmware version, the network addresses, and other
information under various network protocols about the network interface
card. The default setting is On (print).
Printing out a network interface card status page may not be possible
with some network interface cards. For details, see the manual for the
network interface card.
1
Press the MENU key.
2
Press the or key repeatedly until Interface > appears.
3
Press the ENTER key. A blinking question mark (?) appears.
If you want to abandon the interface selection procedure, press the
CANCEL
key. The interface remains unchanged.
4
Press the or key repeatedly until Option appears.
5
Press the ENTER key again. A > appears.
Option
Note
MENU
Interface
Parallel
ENTER
Interface
? Parallel
Interface
? Option
ENTER
Interface >
Option