TA Triumph-Adler LP 4024 - Manual (Page 109)

Using the Operator Panel
1-94
Custom Paper Size Setting
In addition to the standard sizes A5, A4, B5, and Letter for the paper
cassette, paper of other sizes can be fed as custom sizes. When placing
paper of sizes other than A5, A4, B5, or Letter into the paper cassette, set
the size of the paper to be used into the printer by following the procedure
given below. If an option paper feeder (PF-60) is installed, custom sizes for
its paper cassette can be set using the same procedure.
This menu appears when the paper size dial of the paper cassette is set to
CUSTOM
.
Properly set the paper into the paper cassette. For details about the
adjustment of the paper guides and paper stopper inside the paper
cassette, see the Installation Manual supplied with the printer.
1
Pull out the paper cassette from the printer and turn the paper size
dial to CUSTOM.
2
Adjust the paper guides and paper stopper inside the paper cassette
to the size of the paper to be used and load the paper into the
cassette.
Set the size of the paper loaded in the paper cassette into the printer from
the printer operator panel.
3
Press the MENU key.
4
Press the or key repeatedly until Paper Handling >
appears.
5
Press the > key.
>Cassette Size >
Paper
Size Dial
CUSTOM
MENU
Paper Handling >
?