TA Triumph-Adler LP 4024 - Manual (Page 147)

Using the Operator Panel
1-132
Setting the Toner ID
If the type of the toner kit (TK-60 [20,000 pages] or TK-60E [10,000 pages])
was changed, set the toner ID as follows so that on accurate toner gauge
measurement is indicated on the status page. The default setting is CA
(TK-60).
Also refer to the
User's Manual supplied with the toner kit when
replacing the toner container.
1
Press the MENU key.
2
Press the or key repeatedly until Others > appears.
3
Press the > key.
4
Press the or key repeatedly until >Service > appears.
5
Press the > key.
6
Press the or key repeatedly until >>Toner ID appears.
>>Toner ID
MENU
Others >
?
>Service >
?
>>Toner ID
##