TA Triumph-Adler LP 4024 - Manual (Page 150)

Toner Container Replacement
2-2
2.1 Toner Container Replacement
The toner container in the printer should be replaced as soon as the
message display shows Toner low TK-60 or soon after. If you continue to
use the printer, eventually the toner supply will be exhausted at which
point the printer will stop printing and the Replace toner Clean
printer message will be shown instructing you to install a new toner kit.
2.1.1 Toner Container Replacement Interval
Assuming an average toner coverage of 5% and Ecoprint mode turned off,
the toner container will need replacing approximately once every 20,000
pages.*
* For a new printer with a toner kit installed for the first time, the
number of copies that can be printed will be approximately 10,000.
Toner Kits to be Used
Name: TK-60 (20,000 pages)/TK-60E (10,000 pages)
Contents: Toner container
Waste toner bottle
Wiper cloth
Grid cleaner
2 plastic bags (for disposal of the old toner container and
waste toner bottle)
User's manual
• Be sure to distance items such as floppy disks during toner container
replacement.
• Be sure to clean the inside of the printer when replacing the toner
container. For details, see section
2.3 Cleaning on page 2-9 .
• Use of original Kyocera Mita toner kits is highly recommended to
prevent printer trouble and ensure the long life of the printer.
Note