RISCO Group Gardtec GT600 - Manual (Page 69)

Page 67
GT 600 / 601 Engineer’s Reference Guide
Programming Sounder Levels
1) Enter into Engineer Mode
To do this follow Steps 1 to 4 on page 11
With the display showing:-
2) Press No ten times. The display will show:-
3) Press Yes. The display will show:-
4) Press Yes. The display will show:-
5) Press No twice. The display will show:-
6) Enter a value 1 to 9 (1=Low 9=High) followed by
Yes. The display will show:-
7) Press No. The display will show:-
8) Press Yes. The display will show:-
Program . . . . _ _ _
Zones ?
Program . . . . _ _ _
Sounder Levels ?
Program Sounder
Chime Level ?
Program Sounder
Chime Level ?
Program Sounder
Ent / Exit Level ?
Ent / Exit Level
= 05
Chime Level . . . . .
= 05
Chime Level . . . . .
= _ _