RISCO Group Gardtec GT600 - Manual (Page 20)

Page 18
GT 600 / 601 Engineer’s Reference Guide
35) If you are not using Radio Detectors press Yes
and jump to Step 37.
Otherwise
Press No until the display shows:-
Comprehensive instructions on how to setup and program the Radio Expansion
are given in the document Hybrid Wireless Set-Up & Programming Guide
(document number PR5588) supplied with the Radio Receiver.
36) Press Yes. The display will show:-
37) Press No. The display will show:-
Options available are.
Off Expander Card is turned Off
4 (4 Wire) Expander will give 4 zones + 4 tamper zones
8 (EOL) Two wires are used in conjunction with two resistors to give
End Of Line wiring. Expander will give 8 End Of Line zones. This is
the most secure wiring format.
8 (2 Wire) Two wires are used for the zone and a global tamper is used.
(Depending on Grade - Cannot be used in Grade 3 installations).
Program Radio
Functions ?
ZEX 1 Wiring
= Off
Radio ZEX
= On