RISCO Group Gardtec GT600 - Manual (Page 23)

Page 21
GT 600 / 601 Engineer’s Reference Guide
Three Part Sets are available on the GT 600 / 601 control panels. Zones added to
the PT-1 (Part 1) screen will be Removed (Omitted) when the system is Part 1
Set. Zones added to the PT-2 (Part 2) screen will be Removed (Omitted) when
Part Set 2 is used. When Part Set 3 is used Parts 1 & 2 are combined and
Removed (Omitted).
49) If you do not wish to enter PT-1 Zone press Yes
and jump to Step 54.
Otherwise
50) Press No. The display will show:-
51) Enter the Zone number you require for PT-1
followed by Yes.
The display will show for example:-
52) To add more Zones to PT-1 repeat from Step 50.
53) When you have finished adding Zones to PT-1
press Yes.
54) The display will show:- Pt-2 None
Pt-1 004
Enter Zone # _ _ _
then +YES or -NO