RISCO Group Gardtec GT600 - Manual (Page 25)

Page 23
GT 600 / 601 Engineer’s Reference Guide
63) Enter the Zone number you require for Clnr
followed by Yes.
The display will show, for example:-
64) To add more Zones to Clnr repeat from Step 62.
65) When you have finished adding Zones to Clnr
press Yes.
66) The display will show:-
Two Chime suites are available on the GT 600 / 601 control panels. So, for
example, you would have the Front Door on Zone 1 programmed into Ch1 and
the Rear Door on Zone 6 programmed into Ch2. When the system is Unset,
opening the Front Door will produce a Chime. Opening the Rear Door will
produce a different Chime.
It should be noted that Chime must be programmed as On from the user mode.
Please refer to the User Manual for details.
67) If you do not wish to enter Ch1 Zone press Yes
and jump to Step 72.
Otherwise
68) Press No. The display will show:-
Clnr 007
Ch1 None
Enter Zone # _ _ _
then +YES or -NO