RISCO Group Gardtec GT600 - Manual (Page 24)

Page 22
GT 600 / 601 Engineer’s Reference Guide
55) If you do not wish to enter PT-2 Zones press Yes
and jump to Step 60.
Otherwise
56) Press No. The display will show:-
57) Enter the Zone number you require for PT-2
followed by Yes.
The display will show, for example:-
58) To add more Zones to PT-2 repeat from Step 56.
59) When you have finished adding Zones to PT-2
press Yes.
60) The display will show:-
Zones entered as Cleaner will be removed (Omitted) when a Part Set 0 is
performed and will be included into the system (protected) when a Cleaner level
code is entered.
Or
When a system is Full Set and a Cleaner level code is entered the Cleaner zones
will be removed (Omitted).
61) If you do not wish to enter Clnr Zones press Yes
and jump to Step 66.
Otherwise
62) Press No. The display will show:-
Pt-2 005
Clnr None
Enter Zone # _ _ _
then +YES or -NO
Enter Zone # _ _ _
then +YES or -NO