RISCO Group Gardtec GT600 - Manual (Page 62)

Page 60
GT 600 / 601 Engineer’s Reference Guide
4) Press No until the required setting is displayed
then press Yes. The display will show:-
5) Press No until the required setting is displayed
then press Yes. The display will show:-
Note: Duress is defaulted to Off and may not be changed.
6) Press Yes. The display will show:-
7) Press 0 (zero) until the display shows:-
PA = Bells Only
> Non-Testable
Duress : Off
Program . . . . _ _ _
Panic / Duress
01 Jan 00: 00: 01