RISCO Group Gardtec GT600 - Manual (Page 65)

Page 63
GT 600 / 601 Engineer’s Reference Guide
8) Press No until the required setting is displayed.
Then press Yes. The display will show:-
9) Repeat steps 5 - 8 for PGM3 O/P.
The display will show:-
10) Press No. The display will show:-
11) Press Yes. The display will show:-
12) Press No twice. The display will will show:-
13) Enter the On Time hours, followed by Yes.
The display will show:-
14) Press No. The display will show:-
15) Enter the On Time minutes, followed by Yes.
The display will show:-
16) Press No. The display will show:-
Repeat for Timer 1 OFF Time.
17) Press Yes. The display will show:-
Program PGM2 / 3
Timer 1 ON Time ?
Program PGM2 / 3
Timer 1 ON Time ?
Program PGM2 / 3
Timer 1 OFF Time ?
Timer 1 ON Time
= 00:00 Hrs
Program PGM2/3
Timer 1 OFF Time?
Timer 1 ON Time
> _ _ : 00 Hrs
Timer 1 ON Time
= 10:>00 Hrs
Timer 1 ON Time
= 10:>_ _ Hrs
PGM3 O/P
=Strobe =+V
Program PGM2 / 3
Operating Modes ?