Emerson Process Management ControlWave XFC - Manual (Page 106)

F-4 / Appendix F CI-ControlWave XFC
F.4.1.2 Signing Off from the Node
To sign off from a Node, the user must click on the [Sign Off] push button. If the sign-off
attempt is successful, the message “Sign Off Successful” will appear in green (failures are
in red).
Note: For Security Maintenance functions refer to CW MICRO Quick Setup Guide – D5124
– Part 2 – Configuring User Accounts & Privileges.
F.4.2 Locating Nodes
The user may identify which node(s) they would like to communicate with by using the
Locator page. The Nodes can be identified either by loading a proxy file, or by loading Open
BSI information. In either case, they will be displayed as icons in a tree on the left side of
the page.
The Node Locator Web page is accessible by clicking on the Security category button and
choosing the Locate Nodes drop-down menu selection.
Figure F-4 - Locate Nodes Web Page
F.4.3 Contacts
A list of Bristol Inc. offices is provided under the topic Contacts.
The Contacts Page is accessible by clicking on the Security category button and choosing
the Contacts drop-down menu selection.
F.5 STATION CATEGORY FUNCTIONS
The standard application program for the ControlWave XFC allows the user to configure a
station with up to four meter runs. Users must configure Station parameters from the
Station Configuration category section of WebBSI. Seven Web Pages are accessible from
the Station Configuration category section of WebBSI.