Yaskawa J1000 Compact Vector Control Drive - Manual (Page 207)

No. Name Description
U2-06 Motor Speed at Previous Fault Displays the motor speed at the previous fault.
U2-07 Output Voltage at Previous Fault Displays the output voltage at the previous fault.
U2-08 DC Bus Voltage at Previous
Fault
Displays the DC bus voltage at the previous fault.
U2-09 Output Power at Previous Fault Displays the output power at the previous fault.
U2-10 Torque Reference at Previous Fault Displays the torque reference at the previous fault.
U2-11 Input Terminal Status at Previous
Fault
Displays the input terminal status at the previous fault. Displayed as in
U1-10.
U2-12 Output Terminal Status at Previous
Fault
Displays the output status at the previous fault.
U2-13 Drive Operation Status at Previous
Fault
Displays the operation status of drive at the previous fault.
U2-14 Cumulative Operation Time at
Previous Fault
Displays the cumulative operation time at the previous fault.
U2-15 Soft Starter Speed Reference at
Previous Fault
Displays the run speed after a soft start when a previous fault occurred.
Displayed as in U1-16.
U2-16 Motor q-Axis Current at Previous
Fault
Displays q-axis current for the motor at the previous fault.
U2-17 Motor d-Axis Current at Previous
Fault
Displays d-axis current for the motor at the previous fault.
U3: Fault History
Use U3 parameters to display fault data.
U3-01 Most Recent Fault Displays the most recent fault.
U3-02 2nd Most Recent Fault Displays the second most recent fault.
U3-03 3rd Most Recent Fault Displays the third most recent fault.
U3-04 4th Most Recent Fault Displays the fourth most recent fault.
U3-05 5th Most Recent Fault Displays the fifth most recent fault.
U3-06 6th Most Recent Fault Displays the sixth most recent fault.
U3-07 7th Most Recent Fault Displays the seventh most recent fault.
U3-08 8th Most Recent Fault Displays the eighth most recent fault.
U3-09 9th Most Recent Fault Displays the ninth most recent fault.
U3-10 10th Most Recent Fault Displays the tenth most recent fault.
U3-11 Cumulative Operation Time at
Most Recent Fault
Displays the cumulative operation time at the most recent fault.
U3-12 Cumulative Operation Time at 2nd
Most Recent Fault
Displays the cumulative operation time at the second most recent fault.
U3-13 Cumulative Operation Time at 3rd
Most Recent Fault
Displays the cumulative operation time at the third most recent fault.
B.1 Parameter Table
YASKAWA ELECTRIC TOEP C710606 47C YASKAWA AC Drive – V1000 Quick Start Guide 207
B
Parameter List