Yaskawa J1000 Compact Vector Control Drive - Manual (Page 167)

Table A.3 Power Ratings Continued
Item Specification
Three-Phase Model 2A0030 2A0040 2A0056 2A0069
Single-Phase Model
<1> - - - -
Maximum Motor Size Allowed (HP)
<2>
ND Rating 7.5/10.0 10.0 20.0 25.0
HD Rating 7.5 10.0 15.0 20.0
Input
Input Current
(A)
<3>
Three-
Phase
ND Rating 37.0 52.0 68.0 80.0
HD Rating 24.0 37.0 52.0 68.0
Single-
Phase
ND Rating - - - -
HD Rating - - - -
Output
Rated Output Capacity
(kVA)
<4>
ND Rating 11.4 15.2 21.3 26.3
HD Rating 9.5 12.6 17.9 22.9
Output Current (A)
ND Rating
<5> 30.0 40.0 56.0 69.0
HD Rating 25.0
<6>
33.0
<6>
47. 0
<6>
60.0
<6>
Overload Tolerance
ND Rating: 120% of rated output current for 1 minute
HD Rating: 150% of rated output current for 1 minute
(Derating may be required for applications that start and
stop frequently)
Carrier Frequency User-adjustable 2 to 15 kHz
Max Output Voltage (V)
Three-phase power: 200 to 240 V
Single-phase power: 200 to 240 V
(both proportional to input voltage)
Max Output Frequency (Hz) 400 Hz (user-adjustable)
Power
Supply
Rated Voltage
Rated Frequency
Three-phase power: 200 to 240 V 50/60 Hz
Single-phase power: 200 to 240 V 50/60 Hz
DC power supply: 270 to 340 V
<7>
Allowable Voltage Fluctuation -15 to 10%
Allowable Frequency Fluctuation ±5%
Harmonic Corrective
Actions
DC Link Choke Optional
<1> Drives with single-phase power supply input will output three-phase power and cannot run a single-phase motor.
<2> The motor capacity (HP) refers to a NEC rated 4-pole motor. The rated output current of the drive output amps
should be equal to or greater than the motor rated current.
<3> Input current rating varies depending on the power supply transformer, input reactor, wiring connections, and
power supply impedance.
<4> Rated motor capacity is calculated with a rated output voltage of 220 V.
<5> Carrier frequency is set to 2 kHz (Swing PWM). Current derating is required in order to raise the carrier
frequency.
<6> Carrier frequency is set to 8 kHz. Current derating is required in order to raise the carrier frequency.
<7> DC is not available for UL standards.
A.2 Single/Three-Phase 200 V Class Drives
YASKAWA ELECTRIC TOEP C710606 47C YASKAWA AC Drive – V1000 Quick Start Guide 167
A
Specifications